From: Paris Kitsos <pkitsos@eap.gr>
To: Paris Kitsos <pkitsos@eap.gr>
Subject: [Caml-list] 16th IEEE Symposium on Design and Diagnostics of ,Electronic Circuits and Systems (DDECS 2013) : 1st Call for Papers
Date: Fri, 14 Sep 2012 15:05:51 +0300 [thread overview]
Message-ID: <50531D9F.9090808@eap.gr> (raw)
=============================================================
CALL FOR PAPERS
We apologize if you receive multiple copies of this CFP
=============================================================
16th IEEE Symposium on Design and Diagnostics of
Electronic Circuits and Systems (DDECS 2013)
April 8 - 10, 2013, Karlovy Vary (Carlsbad), Czech Republic
http://www.fit.vutbr.cz/events/ddecs2013
=============================================================
***** Submission deadline *****
January 8th, 2013
*******************************
DDECS provides a forum for exchanging ideas, discussing research results, and
presenting practical applications in the areas of design, test, and diagnosis
of electronic circuits and systems. The Symposium is organized by Brno
University of Technology, Faculty of Information Technology, and sponsored by
the Test Technology Technical Council (TTTC) of the IEEE Computer Society.
===== Invited Speakers =====
Rolf Drechsler (University of Bremen)
Erik Jan Marinissen (IMEC)
Kaushik Roy (Purdue University)
===== Paper Submission =====
Prospective authors are cordially invited to submit original papers using the
electronic submission system at the Symposium web page. Papers in English with
a length of 6 pages maximum in IEEE conference style are expected. Accepted
papers will be included to the Symposium Proceedings and will be available
through the IEEE Xplore Digital Library. Specialized student and industrial
sessions, as well as embedded tutorials, will be organized at the symposium.
Proposals for tutorials can also be submitted through the electronic
submission system.
===== Topics of interest include but are not limited to =====
* SoC and NoC Design and Test
* ASIC/FPGA Design
* Built-in Self-Test and Self-Repair
* Bio-Inspired Hardware
* Design Verification/Validation
* Formal Methods in System Design
* Hardware/Software Co-Design
* IP-based Design
* Logic Synthesis
* Defect/Fault Tolerance and Reliability
* Design and Test in Nano-Technologies
* Analog, Mixed-Signal, RF Design and Test
* ATE Hardware and Software
* Design for Testability and Diagnosis
* On-line Testing
* Embedded Systems Testing
* Memory, Processor Testing
* MEMS Testing
* Physical Design
* Dependable HW/SW Systems
===== Important Dates =====
Submission deadline: January 8th, 2013
Notification of acceptance: February 25th, 2013
Camera-ready papers: March 10th, 2013
===== Committee =====
General Chair:
Lukas Sekanina, Brno University of Technology, Czech Republic
Program Chair:
Goerschwin Fey, German Aerospace Center, Germany
General Vice-chair:
Jaan Raik, Tallinn University of Technology, Estonia
Program Co-Chair:
Snorre Aunet, Norwegian University of Science and Technology, Norway
Topic Chairs:
Ondrej Novak, Technical University of Liberec, Czech Republic
Martin Danek, Academy of Sciences of the Czech Republic, Czech Republic
Said Hamdioui, TU Delft, Netherlands
Organizing Committee Chair:
Richard Ruzicka, Brno University of Technology, Czech Republic
=====
More information:
Lukas Sekanina,sekanina@fit.vutbr.cz
Goerschwin Fey,Goerschwin.Fey@dlr.de
--
------------------------------------------------
Dr. Paris Kitsos
Computer Science
School of Science & Technology
Hellenic Open University (HOU)
Tsamadou 13-15, Patras, GR-26222, Greece
Phone : +30 2610 367535
Fax : +30 2610 367528
Email : pkitsos@eap.gr, pkitsos@ieee.org
Webpage: http://dsmc2.eap.gr/index.php/people/73-pk
------------------------------------------------
reply other threads:[~2012-09-14 12:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50531D9F.9090808@eap.gr \
--to=pkitsos@eap.gr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox